 Home | Products
|
| QG Series Air Stream Drier | ||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||
| Features: The dry strength is large and investment of equipment is saving: equipment manufactured: 50-1500kg/h. The automatic content is high and the quality of product is short (only 0.5-2 seconds). So that the automatic can be realized. The raw material can not contact with outer substances. So the pollution is small and the quality of product is good. The equipment will be supplied completely and the heat soure can be chosen freely: The basic type consists of filter, heater , feeder, drying pipe, fan and cyclone separator, Customer can install duster and other auxiliary equipment in accordance with practical conditions, On the choice of heating way, Air steam drier has wide suitability. Customer can choose steam, electricity and air-heated furmace to accordance with the temperature of raw material to be resisted(or temperature of hot air): if≤150℃, chose steam to heat, if≤200℃, electric or steamand electric as supplement or heat conduct oil; if≤300℃,coal air-heated furnace; if≤600℃, oil air-heated furnace. Principle: The damp raw material through conveyer and heated natural air enter into the drier at the same time. They are mixed fully. Because the area of heat exchange is large, the purpose of evaporation and dry can be realized in a short time, The dried finished product is discharged from cyclone separator. Small parts of power dust can be recovered and used through cyclone separator or bag duster.
Note: | ||||||||||||||||||||||||||||||||||||||||